Dry mortar plant exported to the USA is another successful export case of LUTON GROUP.
Congratulations! In August 2024, a medium-sized dry mortar plant was successfully exported to the USA. This is a compact, fully functional, efficient and environmentally friendly mortar production line.
The customer contact us online and after two weeks of communication, our professional consultant accurately developed a detailed dry mortar plant for the customer. After repeated communication and confirmation, the customer from the USA was very satisfied with out plan and quickly placed an order.
Characteristics Of LUTON Dry Mortar Plant To The USA
- Moderate Production Capacity
The LUTON medium-sized dry powder mortar plant has a high production capacity, with an annual output usually between 300000 and 400000 tons, suitable for medium sized production needs.
- Fully Functional
In addition to basic mixing and conveying functions, this medium sized dry mortar plant also has additional functions such as automatic metering and packaging, with high production efficiency and reliable quality.
- Compact Structure
The LUTON medium-sized dry mortar plant has a small footprint, compact structure, easy installation and movement. It is suitable for use in different sites.
- Bucket Elevator
- Storage Silo
- Screw Conveyor
- Weighing Hopper
- Dust Collector
- Pre-mix Hopper
- Mixer
- End Product Hopper
- Packing Machine
- Belt Conveyor
- Air Compress
- PLC Controller
Advantages Of LUTON Medium-sized Dry Mortar Plant
- Stable Quality
LUTON medium sized dry mortar plant adopts mechanical production technology, with precise proportioning, stable measurement, high uniformity, avoiding the influence of human factors, reducing quality fluctuations, and ensuring the performance of mortar.
- High Efficiency
Due to its high degree of automation, LUTON medium-sized dry mortar plant can significantly improve production efficiency, reduce personnel allocation, and lower labor intensity. At the same time, fast production speed also helps to shorten the construction period and improve construction efficiency.
- Save Materials
LUTON medium sized dry mortar plant produced on a large scale in the factory, and through precise metering and proportioning, the loss and waste of raw materials are significantly reduced, reaching the bottom of production costs.
- Environment Friendly
According to the needs of the construction group, LUTON dry mortar plant can produce in a quantitative manner, avoiding the pollution of the surrounding environment caused by traditional mortar production methods such as dust, ash powder, noise, etc. At the same time, the construction site does not require the stacking of various raw materials, which also reduces the risk of environmental pollution.
- Flexible And Maneuverable
LUTON medium sized dry mortar plant can adjust the mixing ratio according to the different user requirements and produce different products to meet the different requirements of various new materials for mortar. And with the use of measuring control equipment, the supply can be quantified at any time according to the userโs usage, ensuring the flexibility and adaptability of production.
Parameters of LUTON 10t/h Dry Mortar Plant
| Item | Specification | Description |
| Feed hopper | 1800*1800mm | Storage of Wet Sand |
| Variable Frequency Belt Conveyor | B500*1500mm | |
| Reducer | XWD7-23-7.5 3kW | |
| Wet San Belt Conveyor | B500*7000mm 4kW electric motor | Transport the wet sand to the drying chamber |
| Diesel Burning Machine | TBG85P | Heat source system, providing heat to dry wet sand |
| Feeder Diameter | ฮฆ325mm | |
| Triple Return Dryer | SHG6210 | Drying, mixing and conveying the materials |
| Cylinder Size | ฮฆ 2000 * 4000mm | |
| Electric Motor | 7.5kW | |
| Vibration Grading Screen | 2500*1200*1500mm0.374kW | Secondary screening on the dried materials |
| Plate Chain Hoist (16m) | NE15 | Lift the sand to the material storage bin |
| Conveying Capacity | 15-20m3/h | |
| Electric Motor | 5.5kW | |
| Reducer | XWD5โ29โ5.5 | |
| Materials Silos | Full Volume: 40m3 Cylinder Plate Thickness: ฮด=4mm or 5mmCone Plate Thickness: ฮด=6mm Silo Diameter: ฯ=3000mm Supporting Legs : ฯ=219mm | Store the materials for mixing |
| Screw Conveyors | LSY219 electric motor 7.5kW | Conveying raw materials into the batching hopper |
| Batcher Machine | Hopper volume: 2m3Tension Sensors: STLScrew conveyor: LSY219Motor: 7.5kW Reducer: LSY-230-5.75 | Materials Batching |
| Bucket Elevator | Conveying Capacity: 15-20 m3/h Motor: 5.5kW Dust Removal Machine: 12 bags, 3kW | Hoist the measured material to the mixer |
| Pre-Mix bin | Volume :2 cm3 Pneumatic Valve: DN300 Dust Collecting Machine: 5 bags | The mixing bin is a pneumatic large door type, which can quickly put the mixed materials into the mixer |
