Mortar Spraying Machine

A mortar spraying machine is used to spray mortar (< 6 mm).

Suitable materials: cement mortar, putty powder, coating, latex paint, real stone paint, dry mortar, thermal insulation mortar, waterproof materials, fireproof materials, thermal insulation materials, sound-absorbing materials and other water-soluble materials.

Scope of application: The mortar spraying machine can be used for wall galling spraying, bridge grouting and waterproof surface spraying, fireproof spraying, ceiling spraying, paint spraying, relief effect paint spraying, sound-absorbing material spraying, wall spraying, waterproof leakage repair, indoor and outdoor wall spraying, cement mortar grouting, thermal insulation material spraying, garden spraying, handicraft spraying. Rockery spraying, waterproofing, plugging and so on.

Parameters of Mortar Spraying Machine

Model No./Concrete pumpPBM20
Theoretical concrete output(m3/h)1.5/1.8
Theoretical concrete pumping pressure (MPa)1.5
Max. vertical conveying height12-15
Max.horizontal transmission distance (m)50
Allowing the concrete slump100-230
Max.Aggregate particles (mm)6
Hopper volume (m3)0.14
Filling height (mm)950
Dynamic model3-phase asynchronous motor
Rated power2.2
Voltage /Frequency(v/hz)380/50
Concrete tube conveying diameter(mm)φ50
Overall dimensions(LxHxW)1700×870×950 mm
Total weight (kg)240
Hydraulic pump typeRam pump
Mortar Spraying Machine
Mortar Spraying Machine

Mortar Spraying Machine VS. Manual Spraying

Spraying MachineVSManual Spraying
300-500M2/hWork Efficiency45-60M2/h
Uniform costing and even thicknessSurface of Coating There are roll marks, grainy and uneven.
Basically no falling ash, save water and materialMaterials CostNeed hand spread, with ground ash, serious material waste
only 1 worker + 1 machineLabor CostNeed 10 workers, high labor cost.
Mortar can penetrate into the wall space, with good adhesion.Adhesion of CoatingManual coating is not easy to reach the wall gap, the costing is not tight enough, low adhesion.

Working Principal of Mortar Spraying Machine

The mixed mortar or other materials will be loaded into the hopper of the mortar spraying machine, the vibrating screen can screen the larger aggregates. The mortar will be sent into the high-pressure chamber by the spiral feeding roller, and then rotates by the high-pressure rotor and the high-pressure stator to form high pressure. The mortar is sent to the nozzle through the high-pressure conveying pipe, and another high-pressure wind is introduced from the nozzle to disperse and accelerate the spraying of the materials.


Secondary Structure Column Pump

Mini Concrete Pump

Features of Mortar Spraying Machine

1. Adopt all-copper GB motor, stable performance. Reject any non-standard aluminum.

2. The connection between the spray gun and the feeding tube can be rotated for easy operation.

3. High construction efficiency and good quality. And small size, easy to carry on site.

4. The sealant sleeve is abrasion resistance.

Contact Us

Tell us your need, our experts will reply you with in 12 hours!